Australian Industrial WearPoloStyle SW21A

Long Sleeve Safety Polo

Hi Vis
$33.99each
+ GST
Description

Available blank or decorated with your logo (embroidery or print). Add your logo in the Logo Studio.

Men’s TrueDry® Safety Long Sleeves Polo with 3M Reflective Tape

• TrueDry® Cotton Back Micromesh with Moisture-Wicking. 160gsm - 60% Cotton, 40% Polyster.

• Contrast colour on front, collar & sleeves

• Two contrast strips on collar & cuffs

• Hoop Pattern 3M ScotchliteTM reflective tapes

• Conforms to AS/NZS 4602.1: 2011 Class D/N, & night use

Fit: Easy Fit

Style sheet (PDF)

Qty & sizes 0 units total
0
0
Total0

Enter a quantity for each size. Change the colour above to add more colours to the same run.

Your logo Add your logo to see it on the garment and get a per-unit price.

The mock-up is a guide only. You approve a real proof before anything is decorated.

Expected despatch1–2 weeks

Estimate only. It assumes you approve the artwork proof on the day we send it (proofs go out within 1–3 business days of your order) and allows 1–2 weeks production from approval. Nothing is produced until you approve the proof.

Low-resolution, blurry or screenshot logos cannot be proofed until we receive a better file (ideally a vector SVG, PDF, AI or EPS), which delays despatch.

Delivery times from Victoria

We ship from Melbourne with Australia Post Parcel Post. Business days after despatch:

StateMetroRegional
VIC2–33–4
NSW2–34–5
ACT3–43–4
QLD2–53–7 (Far North 6–8)
SA2–33–5
TAS2–43–6
WA4–55–10
NT4–64–7 (remote up to 14)

Estimates from Australia Post, not guarantees. Remote areas can take longer.

Total units: 0Subtotal: —

Minimum order 5 — mix sizes and colours

Australian owned Logo decoration available Free mock-up before you order

Delivery Australia-wide, calculated at checkout.

Size chart

This supplier hasn't published a size chart for this garment yet. Ask us in chat or with your quote and we'll send the measurements before you order.

How to measure (lay the garment flat)
  1. Lay a garment that fits you well flat on a table, front up, sleeves out.
  2. Half chest: measure 2.5 cm below where the sleeve joins the body, straight across from side seam to side seam.
  3. SP length: measure from the shoulder point (where the shoulder seam meets the collar) straight down to the bottom of the hem.
  4. Match both numbers to the chart. Between sizes? Most people go up for a relaxed fit.
Specifications
BrandAustralian Industrial Wear
StyleSW21A
TypePolo
ColourYellow/Navy, Orange/Navy
SizeS, M, L, XL, 2XL, 3XL, 4XL, 5XL, 7XL
SupplierWinning Spirit
GenderMen's
Fabric TrueDry® Cotton Back Micromesh with Moisture-Wicking. 160gsm - 60% Cotton, 40% Polyster.
Features
  • Men’s TrueDry® Safety Long Sleeves Polo with 3M Reflective Tape
  •  TrueDry® Cotton Back Micromesh with Moisture-Wicking. 160gsm - 60% Cotton, 40% Polyster.
  • Contrast colour on front, collar & sleeves
  • Two contrast strips on collar & cuffs
  • Hoop Pattern 3M ScotchliteTM reflective tapes
  • Conforms to AS/NZS 4602.1: 2011 Class D/N, & night use
Hi VisYes
SKUWS-SW21A-YELLOW-NAVY-S
Decoration

Add your logo with embroidery or DTF printing, both done in Australia. DTF print prices: front logo $12 per garment, back logo $18 per garment. Embroidery prices: front $12 per garment (up to 6,000 stitches), back $20 per garment (up to 15,000 stitches), plus a one-time $59 setup (digitising) per logo. Prices + GST. Dye-sublimated garments are made to order (polyester only), usually 2–4 weeks from the approved design. Upload your logo above or send it with your quote. You get a free proof within 1–3 business days, and nothing is printed or embroidered until you approve it.

Total units: 0Subtotal: —
Long Sleeve Safety Polo$33.99
Complete the kit

Goes well with Long Sleeve Safety Polo

Pick up where you left off

Recently viewed